Damascus Kitchen Knife Series: Instructions: Download

Assembly Instructions for the KnifeKits.com
Damascus Kitchen Series AV-DKC-xxx
w/ Pre-Machined Handles

Please note that these instructions will work for most of our similarly designed
Damascus kitchen knife series.

--------------------------
Tools Used
Hammer
Files
Sandpaper
--------------------------

Parts Kit (Including handles - Paring Knife Model Shown Above)

If necessary, shorten the two pins so that they stick out about 1 pin diameter on each
side of the assembled bolsters. If they are too long they may bend over instead of peening.

Peen the heads of the pins equally on both sides. Turn the knife over frequently to keep
the heads even on both sides.

File or grind the pins flush with the bolster.

Insert the rivets thru the handle and drive them flush on both sides

Sand the handle and bolsters to suit.

Congratulations!
You have a new Damascus Kitchen Knife